PROJECT

Turbovap single four-stage MVR compressor passed the acceptance


After a single three-stage compressor was put into operation, Turbovap single four-stage MVR compressor has also realized continuous and stable operation, passed customer’s acceptance, the saturated temperature rise has reached 60 ° C and the total compression ratio has exceeded 9, which is firstly invented in China.

Turbovap single four-stage MVR compressor passed the acceptance


After a single three-stage compressor was put into operation, Turbovap single four-stage MVR compressor has also realized continuous and stable operation, passed customer’s acceptance, the saturated temperature rise has reached 60 ° C and the total compression ratio has exceeded 9, which is firstly invented in China.

Turbovap 5100kW high-power centrifugal steam compressor factory acceptance successfully


Recently, a company in Hainan organized relevant technical personnel to our company for the subject matter of the contract: Two three-stage series steam turbocharged compressor units with installed capacity of 5100kW were tested and accepted in the factory. According to the requirements of compressor acceptance, our company conducted idling test and steam load test, which passed the test once and met the delivery conditions and will be put into use soon.   Figure 1: Appearance of steam compressor The compressor adopts three-stage compression, and the maximum pressure ratio reaches 5.3. The case of pressurization of steam compressor with the same type of parameters is still blank in China. At the beginning of the design, according to the actual needs of the owner and combined with the current performance of pressurization, our company organized staff to fully demonstrate the characteristics of high pressure and high pressure ratio of the project and formulate detailed design ideas. And innovative oil route, sealing, assembly and other design schemes to ensure that the unit meets the design and normal operation requirements. Dewei turbine from the unit selection, design, to volute, impeller, gear box and other key components of the manufacturing, and then to overspeed, dynamic balance, machine operation and other test process control, strict quality management, to ensure that the unit on time delivery. During the test period, the performance indexes and technical parameters of the unit reached the excellent standard, and the vibration value of the unit was less than 15μm during the full operation. Figure 2: Commissioning preparation   Figure 3: Compressor test run parameters normal Add: 198 Jinwu Road, Kunlun Economic Development Zone, Liyang City, Jiangsu Province Rp: 0519-87300026/87300027 Sales line: 0519-87309551 Fax: 0519-87303311 Zip code: 213300 Email address: sales@turbovap.cn Website: www.turbovap.cn

< 1234...15 >
Mobile

Mobile

WeChat

WeChat

Add: No.198, Jinwu Rd, Liyang 213300, Jiangsu, China

Tel: +86-519-87300026 / 87300027

Hotline: +86-519-87309551

Fax: +86-519-87303311

E-mail: sales@turbovap.cn

Turbovap

Efficient - Energy Saving - Innovation - Service

Copyright © 2022 Turbovap  www.300.cn