NEWS CENTER NEWS CENTER

NEWS CENTER

/
/
Different Models of Turbovap® Compressors Were Delivered

Different Models of Turbovap® Compressors Were Delivered

  • Categories:News
  • Time of issue:2018-05-15 10:58

(Summary description)Various types of Turbovap® compressors were delivered to customers and put into use in different industries, such as pesticide wastewater treatment ,

Different Models of Turbovap® Compressors Were Delivered

(Summary description)Various types of Turbovap® compressors were delivered to customers and put into use in different industries, such as pesticide wastewater treatment ,

  • Categories:News
  • Time of issue:2018-05-15 10:58
  • Views:
Information

  Various types of Turbovap® compressors were delivered to customers and put into use in different industries, such as pesticide wastewater treatment , chemical industry wastewater treatment, and concentration of plant extracts. Our users cover Jiangsu, Zhejiang, Shandong, Guangdong, Sichuan, etc. Pictures of some cases are shown as below:

 

Case 1: MVR system for sodium sulfate wastewater treatment for a chemical plant in Shandong

The intake air temperature is 100 ℃ and temperature rise is 14℃.It is used for evaporation under ordinary pressure.

 

Case 2: MVR sewage disposal system for a metallurgy plant in Shenzhen

The compressor’s flow rate is 1~2mt/hr and temperature rise is 14~16℃. It is suitable for the system which needs low evaporation and high temperature rise.

 

Case 3: MVR system for the reuse of reclaimed water for a plant in Jiangsu The temperature rise is 16℃.It is suitable for high boiling point salt wastewater concentration.

The compressor’s flow rate is 1~2mt/hr and temperature rise is 14~16℃. It is suitable for the system which needs low evaporation and high temperature rise.

 

Case 4: MVR system for extracting solution concentration for a plant in Sichuan

It’s a anti-explosion model and its temperature rise is 14℃. It is suitable for everywhere with anti-explosion requirement.

 

Case 5: MVR system for high salt wastewater treatment for a chemical plant in Zhejiang

The compressor’s flow rate is 1~2mt/hr and temperature rise is 14~16℃, is made of titanium alloy and dual-phase steel, which is suitable for high salt wastewater treatment.

 

Case 6: MVR system of sewage treatment for a state-owned enterprise in Shandong

For such model, the temperature rise is 15℃, inlet temperature is very low.

 

The picture below shows the salt separated from high salt wastewater by MVR concentration.

Scan the QR code to read on your phone

Turbovap independently developed and produced centrifugal compressors and its auxiliary products, especially centrifugal compressors used in the fields of evaporation, distillation,
Number of views:
1652
Keywords:
After preheated by the preheater, materials come in tube-box of heat exchanger, distributed to every heat exchange tube by the distributor, forming homogeneous liquid film along the tube.
Number of views:
1069
Keywords:
MVR forced circulation evaporator consists of heater, separator and forced circulation pump, etc The materials are heated by the steam outside the heat exchanger and temperature rises.
Number of views:
1107
Keywords:
Plate MVR evaporator consists of plate heat exchanger, separator and material pump, etc. Under the guidance of distribution,
Number of views:
1062
Keywords:
Magnetic Levitation aeration blower is a new concept of the blower, it is high efficiency, low noise, energy saving, environmentally friendly.
Number of views:
1175
Keywords:
Number of views:
1000
Keywords:
Copyright © 2022 Turbovap苏ICP备11079050号-1 IPV6
Turbovap

Mobile

Turbovap

WeChat

Add: No.198, Jinwu Rd, Liyang 213300, Jiangsu, China

Tel: +86-519-87300026 / 87300027

Hotline: +86-519-87309551

Fax: +86-519-87303311

E-mail: sales@turbovap.cn

Turbovap

Efficient - Energy Saving - Innovation - Service

Copyright © 2022 Turbovap
苏ICP备11079050号-1   IPV6
Top